text.skipToContent text.skipToNavigation

Wire Tong

Band, Wiretong

By CHANCE Utility  
Catalog ID: M1729
Two screws clamp the band to the wire tong.

Crossarm Type Saddle

By CHANCE Utility  
Catalog ID: M4744
The Chance Crossarm Wire Tong Saddle is used on underbuilt arms when working space is limited or crowded with pole saddle(s).

Double Type Lever Lift Wire Tong Support

By CHANCE Utility  
Catalog ID: M47601W
Lever Lift Wire Tong Supports are employed where working space on the pole is limited, or on H-frame or heavy suspension insulator construction for raising or lowering conductors with wire tongs.

Epoxyglas Lever Lift

By CHANCE Utility  
Catalog ID: C4001016
Epoxiglas Lever Lift Wire Tong Supports are for the same application as aluminum-base units, but are normally used on higher transmission voltages where more lifting space is required.

Lever Lift Arbor Adapter

By CHANCE Utility  
Catalog ID: M47602
The arbor adapter is available to convert the Single Type Lever Lift to a Double Type when desired.

Pole Clamp Only, 1-1/2"

By CHANCE Utility  
Catalog ID: M47411
Chance Pole Type Wire Tong Saddles are made of lightweight aluminum for handling ease. These rugged heat-treated saddles will support a maximum of 1000 pounds (450kg) without the extension.

Pole Clamp Only, 2"

By CHANCE Utility  
Catalog ID: M47412
Chance Pole Type Wire Tong Saddles are made of lightweight aluminum for handling ease. These rugged heat-treated saddles will support a maximum of 1000 pounds (450kg) without the extension.

Pole Clamp Only, 2-1/2"

By CHANCE Utility  
Catalog ID: M47413
Chance Pole Type Wire Tong Saddles are made of lightweight aluminum for handling ease. These rugged heat-treated saddles will support a maximum of 1000 pounds (450kg) without the extension.

Pole Clamp Only, 3"

By CHANCE Utility  
Catalog ID: M47415
Chance Pole Type Wire Tong Saddles are made of lightweight aluminum for handling ease. These rugged heat-treated saddles will support a maximum of 1000 pounds (450kg) without the extension.

Saddle and Tightener and 1-1/2" Clamp

By CHANCE Utility  
Catalog ID: M47403W
Chance Pole Type Wire Tong Saddles are made of lightweight aluminum for handling ease. These rugged heat-treated saddles will support a maximum of 1000 pounds (450kg) without the extension.

Saddle and Tightener and 2" Clamp

By CHANCE Utility  
Catalog ID: M47404W
Chance Pole Type Wire Tong Saddles are made of lightweight aluminum for handling ease. These rugged heat-treated saddles will support a maximum of 1000 pounds (450kg) without the extension.

Saddle and Tightener and 2-1/2" Clamp

By CHANCE Utility  
Catalog ID: M47405W
Chance Pole Type Wire Tong Saddles are made of lightweight aluminum for handling ease. These rugged heat-treated saddles will support a maximum of 1000 pounds (450kg) without the extension.

Saddle and Tightener and 3" Clamp

By CHANCE Utility  
Catalog ID: M47409W
Chance Pole Type Wire Tong Saddles are made of lightweight aluminum for handling ease. These rugged heat-treated saddles will support a maximum of 1000 pounds (450kg) without the extension.

Saddle and Tightener Less Clamp

By CHANCE Utility  
Catalog ID: M474010W
Chance Pole Type Wire Tong Saddles are made of lightweight aluminum for handling ease. These rugged heat-treated saddles will support a maximum of 1000 pounds (450kg) without the extension.

Saddle Wheel Tightner and Clevis

By CHANCE Utility  
Catalog ID: M474015W
Chance Pole Type Wire Tong Saddles are made of lightweight aluminum for handling ease. These rugged heat-treated saddles will support a maximum of 1000 pounds (450kg) without the extension.

Saddle, Tightner, 1-1/2" Clamp & Extension

By CHANCE Utility  
Catalog ID: M474016W
Chance Pole Type Wire Tong Saddles are made of lightweight aluminum for handling ease. These rugged heat-treated saddles will support a maximum of 1000 pounds (450kg) without the extension.

Saddle, Tightner, 2" Clamp & Extension

By CHANCE Utility  
Catalog ID: M474017W
Chance Pole Type Wire Tong Saddles are made of lightweight aluminum for handling ease. These rugged heat-treated saddles will support a maximum of 1000 pounds (450kg) without the extension.

Saddle, Tightner, 2-1/2" Clamp & Extension

By CHANCE Utility  
Catalog ID: M474018W
Chance Pole Type Wire Tong Saddles are made of lightweight aluminum for handling ease. These rugged heat-treated saddles will support a maximum of 1000 pounds (450kg) without the extension.

Saddle, Tightner, 3" Clamp & Extension

By CHANCE Utility  
Catalog ID: M474019W
Chance Pole Type Wire Tong Saddles are made of lightweight aluminum for handling ease. These rugged heat-treated saddles will support a maximum of 1000 pounds (450kg) without the extension.

Saddle, Tightner, Extension Less Clamp

By CHANCE Utility  
Catalog ID: M474020W
Chance Pole Type Wire Tong Saddles are made of lightweight aluminum for handling ease. These rugged heat-treated saddles will support a maximum of 1000 pounds (450kg) without the extension.

Single Type Lever Lift Wire Tong Support

By CHANCE Utility  
Catalog ID: M4760W
Lever Lift Wire Tong Supports are employed where working space on the pole is limited, or on H-frame or heavy suspension insulator construction for raising or lowering conductors with wire tongs.

Spliced Wire Tong, 2-1/2" x 16'

By CHANCE Utility  
Catalog ID: H464716
Chance Wire Tongs have many applications for moving and holding live conductors clear of the working area, for flat crossarm and/or ridge pin-construction, and many others.

Tower Saddle Less Clamp With Regular Hooks

By CHANCE Utility  
Catalog ID: M4742
The Chance Tower Type Wire Tong Saddle is used to support wire tongs or boom poles on towers. The saddle is securely fastened to the angle iron tower leg by four hooks tightened by wing nuts.

Tower Saddle With Small And Large Hooks

By CHANCE Utility  
Catalog ID: T4001413
The Chance Tower Type Wire Tong Saddle is used to support wire tongs or boom poles on towers. The saddle is securely fastened to the angle iron tower leg by four hooks tightened by wing nuts.

Wire Tong Band For 2-1/2" Pole

By CHANCE Utility  
Catalog ID: M17291
Two screws clamp the band to the wire tong.

Wire Tong Band For 3" Pole

By CHANCE Utility  
Catalog ID: M17292
Two screws clamp the band to the wire tong.

Wire Tong Band, For 1-1/2 Pole

By CHANCE Utility  
Catalog ID: M17293
Two screws clamp the band to the wire tong.

Wire Tong Blocks Clamp For 1-1/2" Pole

By CHANCE Utility  
Catalog ID: M4743
Use the Chance Wire Tong Blocks Clamp where pull is in line with pole. The Wire Tong Blocks Clamp is secured to the wire tong under tension.

Wire Tong Pole Clevis, 2-1/2"

By CHANCE Utility  
Catalog ID: M17285
The Wire Tong Pole Clevis clamps around the vertical wire tong supporting an auxiliary crossarm, and engages the butt rings of the two wire tongs used as side braces.

Wire Tong Pole Clevis, 3"

By CHANCE Utility  
Catalog ID: C4000345
The Wire Tong Pole Clevis clamps around the vertical wire tong supporting an auxiliary crossarm, and engages the butt rings of the two wire tongs used as side braces.
Page 1 of 2