Covers
62 Products Found
5’ Conductor Cover with 4’ Epoxiglas Handle
By CHANCE Utility
Catalog ID: C4060181
The conductor covers mate with insulator covers to cover pin-type or post-type insulator construction and also can be used with the deadend cover.
ABS Pole Cover - 12" dia. x 12"
By CHANCE Utility
Catalog ID: PSC4060707
Pole Cover - Class 4 (36.6kV Covered Phase-to-Covered Phase)
ABS Pole Cover - 12" dia. x 24"
By CHANCE Utility
Catalog ID: PSC4060706
Pole Cover - Class 4 (36.6kV Covered Phase-to-Covered Phase)
ABS Pole Cover - 12" dia. x 48"
By CHANCE Utility
Catalog ID: PSC4060705
Pole Cover - Class 4 (36.6kV Covered Phase-to-Covered Phase)
ABS Pole Cover - 12" dia. x 72"
By CHANCE Utility
Catalog ID: PSC4060704
Pole Cover - Class 4 (36.6kV Covered Phase-to-Covered Phase)
ABS Pole Cover - 9" dia. x 12"
By CHANCE Utility
Catalog ID: PSC4060703
Pole Cover - Class 4 (36.6kV Covered Phase-to-Covered Phase)
ABS Pole Cover - 9" dia. x 24"
By CHANCE Utility
Catalog ID: PSC4060702
Pole Cover - Class 4 (36.6kV Covered Phase-to-Covered Phase)
ABS Pole Cover - 9" dia. x 36"
By CHANCE Utility
Catalog ID: PSC4060701
Pole Cover - Class 4 (36.6kV Covered Phase-to-Covered Phase)
ABS Pole Cover - 9" dia. x 48"
By CHANCE Utility
Catalog ID: PSC4060700
Pole Cover - Class 4 (36.6kV Covered Phase-to-Covered Phase)
ABS Pole Cover - 9" dia. x 72"
By CHANCE Utility
Catalog ID: PSC4060699
Pole Cover - Class 4 (36.6kV Covered Phase-to-Covered Phase)
Class 2, Temporary Conductor Cover, 5’
By CHANCE Utility
Catalog ID: PSC4060616
5' Temporary Conductor Cover
Class 2, Temporary Conductor Cover, 6’
By CHANCE Utility
Catalog ID: PSC4060617
6' Temporary Conductor Cover
Class 2, Type II Flexible Rubber Cutout Cover
By CHANCE Utility
Catalog ID: PSC24CC
Cutout Cover - Class 2 Type II Flexible Rubber Cover, 24” x 15” x 3.75”
Class 4 Universal Hot Cover, 36.6 kV
By CHANCE Utility
Catalog ID: PSC4060692
Universal Hot Cover - Class 4 (36.6kV Covered Phase-to-Covered Phase)
Class 6 72.5 kV Spiral Conductor Cover
By CHANCE Utility
Catalog ID: PSC4060737GA
Provides protection for accidental brush contact during live line maintenance up to 72.5kV. Tested per ASTM F712. Made from tough, durable ABS Plastic. Includes grip-all adapter for hotstick installation.
Conductor Cover Grip-All Adapter Replacement Kit
By CHANCE Utility
Catalog ID: PSC4032879
Conductor Cover Grip-All Adapter Replacement Kit
Conductor Cover With Grip-All Adapter, 5’
By CHANCE Utility
Catalog ID: C4060181GA
The conductor covers mate with insulator covers to cover pin-type or post-type insulator construction and also can be used with the deadend cover.
Conductor Cover, 5'
By CHANCE Utility
Catalog ID: M4931
Two conductor covers lock with insulator cover on middle conductor of 34.5 kV sub-transmission lines.
Conductor Cover, 5’
By CHANCE Utility
Catalog ID: P4060184
The conductor covers mate with insulator covers to cover pin-type or post-type insulator construction and also can be used with the deadend cover.
Conductor Cover, 5’
By CHANCE Utility
Catalog ID: C4060514GA
The conductor covers couple with the insulator units and deadend units to cover pin-type or post-type insulator construction.
Crossarm Cover Up
By CHANCE Utility
Catalog ID: C4060504
For energized line work, this rigid cover up fits onto wood or steel crossarm sizes up to 3.75" x 4.75". The two-piece design telescopes from 13.1 to 20.9 inches.
Crossarm Cover, 24” Long
By CHANCE Utility
Catalog ID: M4933
Crossarm covers are used to help prevent tie wires from contacting the crossarm when tying and untying insulators.
Crossarm End Cover
By CHANCE Utility
Catalog ID: C4060102
This cover is used to cover the end of the crossarm to help prevent tie wires from contacting the crossarm during tying and untying.
Cutout Cover with Locking Pin
By CHANCE Utility
Catalog ID: C4060009
This cover aids in the protection of linemen working near most open-type cutouts rated at 25kV or under, but it will not fit over cutouts with linkbreak levers or similar devices.
Deadend Cover
By CHANCE Utility
Catalog ID: C4060164
This cover is made of orange linear polyethylene and is designed to fit over a maximum of two 10-inch diameter deadend insulators.
Deadend Cover
By CHANCE Utility
Catalog ID: C4060537
The conductor covers couple with the insulator units and deadend units to cover pin-type or post-type insulator construction.
Insulator Cover, 12”
By CHANCE Utility
Catalog ID: C4060557
The conductor covers couple with the insulator units and deadend units to cover pin-type or post-type insulator construction.
Insulator Cover, 16-1/2”
By CHANCE Utility
Catalog ID: C4060557L
The conductor covers couple with the insulator units and deadend units to cover pin-type or post-type insulator construction.
Insulator Cover, 22” to 34”
By CHANCE Utility
Catalog ID: C4060046
Insulator cover is designed to be used in conjunction with two conductor covers on insulators above 13 kV. Fits over insulator and locks with a conductor cover on each end. Polypropylene rope swings under the crossarm and hooks with a clampstick. Helps to prevent insulator cover from dislodging due to bumping or wind gusts.
Insulator Cover, 6” with Grip-All Adapter
By CHANCE Utility
Catalog ID: C4060182
The insulator covers mate with conductor covers to cover pin-type or post-type insulator construction and also can be used with the deadend cover.