text.skipToContent text.skipToNavigation

Universal Tool Accessories

Adapter

By CHANCE Utility  
Catalog ID: M445584
When this adapter is mounted on a universal stick, and any universal stick, and any universal tool is mounted on the adapter, the tool can be set at almost any angle to the stick.

Adjustable Insulator Fork

By CHANCE Utility  
Catalog ID: M445567
Designed to grasp 9" and 10" disk insulators used in deadend construction,will raise most pin type insulators up to 15 lb. Fiber jaws open and close by rotating screw.

Adjustable Insulator Fork

By CHANCE Utility  
Catalog ID: T4031101
Designed to grasp 9" and 10" disk insulators used in deadend construction,will raise most pin type insulators up to 15 lb. Fiber jaws open and close by rotating screw.

Aerosol Can Holder

By CHANCE Utility  
Catalog ID: C4032270
By pulling the rope on this tool, a prong reaches out to depress the nozzle of an aerosol can to apply G.E. Insuljel to insulators or insecticides to bee and wasp nests on poles and crossarms.

All-Angle Pliers

By CHANCE Utility  
Catalog ID: C4030177
Designed to grasp from any angle, and tighten by clockwise rotation of the Universal Tool handle. The jaws are held firmly in position with a wing-nut.

All-Purpose Cotter Key Tool

By CHANCE Utility  
Catalog ID: M445582
For pulling and replacing hump-type cotter keys. Particularly suitable for use on clevis pins and ball socket insulators. Easy guiding of cotter key provided by contoured slot and raised eye pin.

Ball Socket Adjuster

By CHANCE Utility  
Catalog ID: M445587
C Type

Ball Socket Adjuster

By CHANCE Utility  
Catalog ID: M445522
Fork Type

Ball Socket Adjuster

By CHANCE Utility  
Catalog ID: C4030126
Similar to the M4455-87 Chance Ball socket Adjuster, this Adjuster is designed to handle socket adapters up to 2.75 inches wide.

Bolt Head Wrench

By CHANCE Utility  
Catalog ID: M445588
Used on heads of 3/4" and 5/8" dia. bolts to keep bolt from turning as nut is being tightened.

Brush, Paint

By CHANCE Utility  
Catalog ID: M445525
A three-inch brush, with bristles set in rubber, for painting around live apparatus. Useful for applying conductor paint on insulator heads.

Brush, Wire

By CHANCE Utility  
Catalog ID: C4030320
Semi-tubular shape allows linemen to clean 6" of entire circumference of conductor.

Carton of 10 Conductor Cleaning Brushes

By CHANCE Utility  
Catalog ID: M1899
V-position of brushes gives 2-sided cleaning action. As brushes wear, they can be rotated, by loosening the anchor screws, so that unused bristles will come in contact with conductor.

Chuck Blank Tool, 5/8" Opening

By CHANCE Utility  
Catalog ID: M445537
The Chuck Blank can be used for a variety of applications, such as inserting screw drivers, saws, etc. The wing nut tightens the installed tool.

Chuck Blank Tool, 5/8" Opening

By CHANCE Utility  
Catalog ID: M445510
Screw drivers, hack saws, and other tools may be inserted in this device and secured by soldering. For wingnut tightened Chuck Blank order No. M4455-37.

Clamp Stick Head, 6"

By CHANCE Utility  
Catalog ID: M445529B
A Universal Clamp Stick Head for use with Eye Screw Grounding Clamps. The 6" head is for long eye screw grounding clamps.

Clear Vision Mirror

By CHANCE Utility  
Catalog ID: M445538
Angle adjustment enables the operator to inspect insulators, switch bases, and other equipment which is difficult to see without coming in contact with energized conductors.

Clevis Pin Installer

By CHANCE Utility  
Catalog ID: M4455102
This tool has particular application on EHV hardware and insulators where the pin must be placed in semi-recessed areas.

Conductor Cleaning Brush

By CHANCE Utility  
Catalog ID: M445592
Semi-tubular shape allows linemen to clean 6" of entire circumference of conductor with two stick position.

Conductor Cleaning Brush

By CHANCE Utility  
Catalog ID: M445563
V-position of brushes gives 2-sided cleaning action. As brushes wear, they can be rotated, by loosening the anchor screws, so that unused bristles will come in contact with conductor.

Conductor Cleaning Brush, Tube Only

By CHANCE Utility  
Catalog ID: M445593
Semi-tubular shape allows linemen to clean 6" of entire circumference of conductor.

Cotter Key Holder

By CHANCE Utility  
Catalog ID: M4455103
Used to install cotter keys into semirecessed hardware such as found EHV, this tool will hold the keys of the position for proper insertion into clevis pins.

Cotter Key Puller

By CHANCE Utility  
Catalog ID: M445596
This Cotter Key Puller is used to partially withdraw a ball-socket cotter key so that the insulator can be removed from another insulator hanger.

Cotter Key Pusher

By CHANCE Utility  
Catalog ID: M445519
For ball and socket insulator coupling. Straight end of the tool enters the socket opening to force cotter key out. Curved end forces cotter key back into position.

Cotter Key Tool

By CHANCE Utility  
Catalog ID: C4030006
The Cotter Key Tool is a companion tool to Part No. C403-0005, both designed for ball and socket type insulator couplings.

Cotter Key Tool

By CHANCE Utility  
Catalog ID: C4030005
Used for ball and socket insulator couplings, this tool is used to push the cotter key into position where great force is required.

Cutout Tool

By CHANCE Utility  
Catalog ID: M44555
While this tool was designed for removing and replacing the doors of enclosed cutouts, its finger-like grasp makes it useful on many other jobs where a sure grip is required.

Disconnect Tool, Aluminum

By CHANCE Utility  
Catalog ID: M44559
Used for opening and closing switches, opening enclosed cutouts, etc.

Disconnect Tool, Bronze

By CHANCE Utility  
Catalog ID: C4001418
Used for opening and closing switches, opening enclosed cutouts, etc.

Epoxiglas Handles Only, 4' 3-1/2"

By CHANCE Utility  
Catalog ID: H18612
Chance Epoxiglas® 1.25" diameter handles may be easily attached to wire cutters or other hand tools for use in hot line maintenance or emergency repair work.
Page 1 of 3