text.skipToContent text.skipToNavigation
0
 
  2. Products
  3. Power & Utilities
  4. Tools, Dies & Accessories
  5. Jumpers, Load Pick-Up & Load Break
  6. By-Pass Jumper Set
  7. 15 kV By-Pass Jumper - 16', 2/0 Cable

15 kV By-Pass Jumper - 16', 2/0 Cable

By CHANCE Utility 

Catalog ID: C6010262

By CHANCE Utility
Catalog ID:  C6010262
INSULATED BY-PASS JUMPER - 15KV-2/0-16FT, A total of 16’, the tool features mid-span an orange 8’ epoxy-resin, rigid 1.5" fiberglass-reinforced-plastic (FRP) tube that serves as a support for easy handling of the jumper set by rubber gloves or hotline tools. Two non-metallic hangers-one at each end of the FRP support tube-provide for parking the by-pass clamps while moving the jumper set into or out of the work area. 4’ of 1/0 cable extends from both ends of the rigid support.
  • INSULATED BY-PASS JUMPER - 15KV-2/0-16FT
  • A total of 16’, the tool features mid-span an orange 8’ epoxy-resin, rigid 1.5" fiberglass-reinforced-plastic (FRP) tube that serves as a support for easy handling of the jumper set by rubber gloves or hotline tools
  • Two non-metallic hangers-one at each end of the FRP support tube-provide for parking the by-pass clamps while moving the jumper set into or out of the work area
  • 4’ of 1/0 cable extends from both ends of the rigid support.

Center support for easy application. Available in four jumper-cable sizes. Features mid-span orange 8’-long epoxy-resin, fiberglassreinforced-plastic (FRP) tube. Rigid 1-1/2”-O.D. tube serves as a support for easy handling of jumper set by rubber gloves or hot-line tools. This makes the unit especially handy when jumpering switchgear, reclosers or cutting in double deadends. Completely pre-assembled. Two non-metallic hangers – one at each end of the FRP support tube. These hangers provide for parking the by-pass clamps while moving the jumper set into or out of the work area since the 16’-long jumper cable (with EPR jacket) is secured where it exits the FRP tube, 4’ of cable extend from both ends of the rigid support. Threaded compression assemblies – each comprising a connector, nut and lockwasher, all of copper – are applied at the cable ends. Two clamps (each a Chance C6001743) also come installed with cable strain-relief clamps to complete the by-pass jumper set.

Contact Us

More Options

Get a Quote

Product Details

General

EU RoHS Indicator No
Torque Rating 250 in-lbs
UPC 096359024804

Dimensions

Diameter 1.5 in
Jaw Opening Size - Maximum 1.5 in
Jaw Opening Size - Minimum .162 in
Length 16 ft
Length - Jumper 192 in
Weight 21.56 lb

Electrical Ratings

Amperage Rating 300
Current Rating 300 A
Voltage - Maximum 15 kV
Voltage Rating 15 kV

Conductor Related

Conductor Diameter (Main) - Maximum 1.5 in
Conductor Diameter (Main) - Minimum 0.162 in
Conductor Size 2/0 AWG

Resources and Downloads