text.skipToContent text.skipToNavigation

Square Straight Steel Pole - SSS-P

By Progress Lighting 
By Progress Lighting
Lighting installations for side and top mounting of luminaires with effective projected area (EPA) not exceeding maximum allowable loading of the specified pole in its installed geographic location.
  • SHAFT: One-piece straight steel with square cross section, flat sides and minimum 0.238” radius on all corners
  • Minimum yield of 46,000 psi (ASTM-A500, Grade B)
  • Longitudinal weld seam to appear flush with shaft side wall
  • Steel base plate with axial bolt circle slots welded flush to pole shaft having minimum yield of 36,000 psi (ASTM A36)
  • BASE COVER: Two-piece square aluminum base cover included standard
  • POLE CAP: Pole shaft supplied with removable cover when applicable; Tenon and post-top configurations also available
  • HAND HOLE: Rectangular 3x5 steel hand hole frame (2.38” x 4.38” opening); Mounting provisions for grounding lug located behind gasketed cover
  • ANCHOR BOLTS: Four galvanized anchor bolts provided per pole with minimum yield of 55,000 psi (ASTM F1554). Galvanized hardware with two washers and two nuts per bolt for leveling
  • Durable thermoset polyester powder coat paint finish with nominal 3.0 mil thickness
  • Powder paint prime applied over “white metal” steel substrate cleaned via mechanical shot blast method
  • Decorative finish coat available in three standard colors; Custom colors available; RA number prefer able; Internal protective coating available
Add to List

More Options

Where to Buy

Product Details

General

New Products No

Resources and Downloads