Conduit Riser Support Grips, Single Weave, Closed Mesh, Ring Type, 3.00" Conduit, Tin-Coated Bronze, 1.75-1.99"

By Hubbell Wiring Device-Kellems

Catalog ID: 02211025

Conduit Riser Support Grips, Single Weave, Closed Mesh, Ring Type, 3.00" Conduit, Tin-Coated Bronze, 1.75-1.99"

By Hubbell Wiring Device-Kellems

Catalog ID: 02211025

Conduit Riser Support Grips, Single Weave, Closed Mesh, Ring Type, 3.00" Conduit, Tin-Coated Bronze, 1.75-1.99"

Conduit Riser Grips - Single Weave, Closed Mesh - Kellems® Conduit Riser Support Grips are available in closed mesh and in split mesh with lace or rod closures, to cover all applications including single cable or multiple wire support. Refer to page X-37 for grip selection assistance for cable bundles. The standard material is tin-coated bronze strand. The grip is permanently fastened to a support ring, resulting in a one piece unit which will allow air ventilation within the conduit. The ring will fit standard electrical rigid metal conduit and schedule 40 rigid PVC conduit only. Recommended safety factor is ten for catalog listed support grips.

Suitable for standard rigid metal conduit and schedule 40 rigid PVC conduit only
Pemanently fastened to support ring
For permanent support when cable end is available to be installed through the grip

Closed Mesh

Add to List

More Options

Where to Buy

See locations

General

Application	Cable Support in Conduit
Approx Breaking Strength	1,990 lbs
Construction	Woven
Material	Bronze, Tin Coated
Material - Mounting Hardware	Mounts Inside Conduit
OEM Brand Name	Hubbell Wiring Device-Kellems
Performance	Mechanical - Approximate Breaking Strength - 1,990 (8,851)
Series	Conduit Riser
Style	Closed Mesh, Single Weave
Type	Ring Type
UPC	783585305066